Lidark
.stl files · binary and ASCII · free · no upload

Online STL viewer free, no upload.

Look at an .stl file in your browser before it reaches your slicer: size, triangle count, orientation, holes. It is free, needs no account, and your model never leaves your device.

Your file stays on your computer: nothing is uploaded.The file is read and displayed by your browser. No upload, no account, no analytics.

Drop your survey here

PLY, OBJ, GLB, glTF, STL, LAS, PCD, a ZIP archive, or a 2D plan as PNG or PDF. For a textured OBJ, drop its ZIP (Lidark export), or its MTL and images, or the folder.

or
.ply .obj .glb .gltf .stl .las .pcd .zip .png .pdf

What is an STL file?

STL dates from 1987, when 3D Systems invented stereolithography, the first 3D printing process, and needed a way to describe a part to its machine. The name is usually read as “stereolithography” or “standard triangle language”. Nearly forty years later it is still the default exchange format of 3D printing: Cura, PrusaSlicer and Bambu Studio open it, and repositories such as Thingiverse and Printables distribute models almost entirely as STL.

An STL describes only a surface, as a list of triangles. Each triangle is three corner points and one normal. There is no colour, no texture and no unit, which is why it is so simple and so widely supported.

Binary or ASCII?

The ASCII version is readable text: every facet is written out with the words “facet normal” and “vertex”. It is easy to debug but heavy. The binary version has an 80-byte header, a count of triangles, then exactly 50 bytes per triangle, so it is about five times smaller and loads much faster. Most programs write binary today. This viewer reads both.

Check a model before you slice it

A failed print costs hours and filament, and many failures start with the file rather than the printer. A quick look beforehand catches the usual suspects.

  • Units: STL carries none, and slicers assume millimetres. A model exported in metres or inches turns up tiny or enormous. The viewer reads one unit as one metre, so a part that measures 50 m here is 50 mm in a slicer: read the figures as millimetres.
  • Size: the statistics give the width × length × height, so you can tell at once whether the part fits your print bed.
  • Orientation: an upright model matters for supports and layer strength. If it lies on its side, turn on “Z is up”.
  • Triangle count: millions of triangles slow a slicer down and rarely improve a print.
  • Holes and flipped faces: they show up as dark patches or missing areas on the lit surface.

What this viewer shows for an STL

Since STL holds no colours, the surface is coloured with the altitude ramp, which makes relief and overhangs easy to read. The statistics list the number of vertices and triangles, the size as W × L × H and the height range. You can orbit and zoom, view from above, measure between two points, and save a PNG screenshot.

The file is read in chunks in your browser, with no upload: several hundred MB open on a desktop, and about 100 to 150 MB at most on a phone.

From a scan to a print

A scan can end up in STL too, for example to print a relief or a section of a cave. Lidark exports PLY, OBJ and GLB, which you can open here as well, and CloudCompare or MeshLab can convert a mesh to STL.

Check an STL file online before printing

  1. Drop the .stl

    Drag the file onto the drop zone, or pick it from your files.

  2. Read the statistics

    Check the triangle count and the W × L × H size against your print bed.

  3. Inspect the shape

    Orbit and zoom, look for holes and odd faces, turn on “Z is up” if the part lies on its side.

  4. Measure and capture

    Measure a key dimension between two points, then save a PNG.

Frequently asked questions

Does the viewer open both binary and ASCII STL?

Yes. It recognises either encoding on its own, there is nothing to choose.

Why is my STL not in colour?

STL files carry no colours. The viewer colours height with an altitude ramp so the shape reads clearly.

What unit does an STL use?

None: the format stores plain numbers. Slicers treat them as millimetres. The viewer shows them as metres, so a distance of 50 m on screen is 50 mm for your slicer.

Is my STL uploaded anywhere?

No. The file is read by your browser, on your device. No upload, no account, no analytics.

Can I check that my model fits my printer?

Yes: the statistics give the size as W × L × H, and you can measure between two points on the model.

How large an STL can I open?

Several hundred MB on a recent computer, since reading is done in chunks. On a phone, stay under about 100 to 150 MB.

Exporting a survey from the Lidark app

  1. Open the survey in Lidark, then tap Export.

  2. Pick PLY (recommended, with colours) or OBJ, or the 2D plan as PNG or PDF.

  3. Save to Files, or send the file to yourself by AirDrop or email, then open it here.

The 2D plan is free; 3D export (PLY, OBJ) is part of Lidark Pro. This viewer is always free.